Vendor Name: HP
Exam code: HP5-K03D
Exam Name: Delta - Supporting and Servicing HP 3PAR StoreServ Solutions
Click the link below to get full version
http://www.certifyguide.com/exam/HP5-K03D/
Question: 1
|
Refer
to the exhibit.
You
are installing an HP 3PAR StoreServ 7200 with an additional M6720 drive enclosure.
Where should you install four LFF NL disks and four LFF SSDs in the new
enclosure for a supported configuration'?
A.
SSD drives in Slot 0, 4, 8, and 12; NL drives in Slot 16, 20, 1, and 5
B.
SSD drives in Slot 0, 4, 8, and 12; NL drives in Slot 3, 7, 11, and 15
C.
NL drives in Slot 0, 1, 2, and 3; SSD drives in Slot 4, 5, 6, and 7
D.
NL drives in Slot 0, 3, 20, and 23; SSD drives in Slot 4, 16, 7, and 19
Answer: B
|
Explanation:
LFF
drives must be loaded in pairs of identical drives starting at the bottom of a
column, leaving no empty slots between drives in the column. Columns of drives
in the M6720 enclosure must be of the same type (SSD or NL) and, for HDDs, the
same rotational speed. Drives of different types may not be mixed in a single
column. It is permitted to have empty columns between columns containing
drives. Different columns do not have to contain the same number of drives
Question: 2
|
A
customer has tested an HP 3PAR StoreServ 7000 in a try-and-buy scenario and now
wants to buy the system. During the initial setup, the customer decides against
a connection to HP 3PAR Central. The customer wants you to enable the
connection in Secure Network Mode (SNM). Which port should you enable on the
customer's firewall?
A.
20 (FTP)
B.
161 (SNMP)
C.
389 (LDAP)
D.
443 (HTTPS)
Answer: B
|
Question: 3
|
What
is the procedure change when you use HP 3PAR SmartStart during an HP 3PAR
StoreServ 7000 installation?
A.
A default password is no longer generated for the 3paradm account.
B.
The serial ports on the system are disabled.
C.
All hosts accessing LUNs on the system must be configured using HP 3PAR
SmartStart.
D.
The Virtual Service Processor must be used
Answer: C
|
No comments:
Post a Comment